Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multiparty Conference in CME

Hi,

I have configured for multiparty ad-hoc conference in cme 7.0(0), but i m having an error message while trying to conference " Cannot Complete Conference "

the dsp resources are properly allocated.

#show dspfarm all

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1

Profile Description :

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 4

Number of Resource Available : 4

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 2 23.6.2 UP N/A FREE conf 1 - - -

0 2 23.6.2 UP N/A FREE conf 1 - - -

0 3 23.6.2 UP N/A FREE conf 1 - - -

0 3 23.6.2 UP N/A FREE conf 1 - - -

Total number of DSPFARM DSP channel(s) 4

Please help me..

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Multiparty Conference in CME

Please post your configuration. Did you configure the conference ephone-dns? I've seen that to be a common issue.

Chris

4 REPLIES
Hall of Fame Super Silver

Re: Multiparty Conference in CME

Please post your configuration. Did you configure the conference ephone-dns? I've seen that to be a common issue.

Chris

New Member

Re: Multiparty Conference in CME

Thanks for your valuable reply.....

i configured coneference dns and its working perfectly now...

configured as

ephone-dn XX dual-line

number A000

conference ad-hoc

end

ephone-dn XX1 dual-line

number A000

conference ad-hoc

preference 1

end

ephone-dn XX2 dual-line

number A000

conference ad-hoc

preference 2

end

ephone-dn XX3 dual-line

number A000

conference ad-hoc

preference 3

end

thanks alot...

Hall of Fame Super Silver

Re: Multiparty Conference in CME

Glad it worked for you, please remember to rate helpful posts!

Chris

New Member

Re: Multiparty Conference in CME

hi howz ur issue fixed i am also having same problem please help me in this

382
Views
5
Helpful
4
Replies