I run CME on a 2651XM router with IOS c2600-adventerprisek9-mz.124-15.T9.bin. I know I can make multiple simultaneous outgoing calls on one sip trunk but what I wanted was several different phone numbers for incoming calls.
1) Can this platform do multiple sip trunks or do I have to upgrade to a later router? (which one).
2) would any of the latest IOS releases enable this router to do multiple sip trunks?
3) I read on this forum that I might be able to do multiple sip trunks if the provider didn't require me to register, but I've never seen a sip provider that operates without registration.
If I have to upgrade my router then ok but if there's any way to achieve multiple incoming phone numbers (DID's) on my 2651XM then I'd like to investigate that.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...