I am facing the following situation , your help is highly appreciated.
I want to get 2 PRI-Groups on the same PRI and use MGCP as CUCM will control it. The scenario is as following :
1st PRI-Group is for incoming calls ONLY from PSTN , it should use timeslots 1-11
2nd PRI-Group is for outgoing calls ONLY from PSTN, it should use timeslots 20-30
How is the possibility to implement that solution on CUCM 6.x.? I know that there is a possibility for only one PRI-group fraction-based feature using MGCP , and there is a solution using H323 ; but I want that kind of solution as CUCM will control some other FXOs/FXSs for the ease of use need.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...