Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MVA not wokring proper

Hello all,

I have two sites connected to my CUCM.
One is configured as H.323 & other is MGCP.

I have setup MVA as per documents, but i am not completely successfull to make it work.

When i call MVA number from H.323 Site, nothing happened & call drops after exactly 10 sec
When i call MVA number from MGCP site, MVA greeting invokes & it ask me to enter remote destination number, as i enter remote destination number my call drops.

Can any body suggest what could a problem ?

My configuration on H.323 GW is:

************************************************************
voice service voip
allow-connections h323 to h323
no supplementary-service h225-notify cid-update
fax protocol cisco
h323
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729br8
codec preference 3 g729r8
codec preference 4 g711alaw
!
voice translation-rule 1
rule 1 /.*\(....\)/ /\1/
!
voice translation-profile 1
translate called 1
!
voice-card 0
dsp services dspfarm
!
!
application
service aaa http://142.100.64.12:8080/ccmivr/pages/IVRMainpage.vxml
!
voice-port 0/1/0:23
translation-profile incoming 1
!
!
sccp local FastEthernet0/0.302
sccp ccm 142.100.64.12 identifier 1 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0.302
associate ccm 1 priority 1
associate profile 1 register sb-transcode
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729br8
codec g729r8
maximum sessions 1
associate application SCCP
!
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
!
dial-peer voice 8 pots
service aaa
incoming called-number 3300
direct-inward-dial
!
dial-peer voice 9 voip
destination-pattern 3300
session target ipv4:142.100.64.12
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
dial-peer voice 10 voip
preference 1
destination-pattern 3300
session target ipv4:142.100.64.11
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
************************************************************

My MVA number is 3033300

CUCM Configuration

Enable Enterprise Feature Access = Truse
Enable Mobile Voice Access = True
Mobile Voice Access Number = 3300
Matching CAller ID = Complete Match
Number of Digits for Caller ID = 10
MVA number = 3300
Remote Destinaton = 2453333 (Associated with H.323 Site Phone)
Remote Destinaton is configured for RDP
End User configured which is associated with RDP.


attached is the debug voice application vxml result

Regards,

477
Views
0
Helpful
0
Replies
CreatePlease login to create content