Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MWI doesn't light for GDM

I was under the impression that if you add the extension for the GDM to a button on a phone the MWI of the phone will light when the GDM has a voicemail. This is not working in my case. The button has the GDM extension and the envelope shows next to the button. The user can also access the GDM but no MWI on the phone. Any ideas?

Thanks,

Diego

3 REPLIES
Hall of Fame Super Red

Re: MWI doesn't light for GDM

Hi Diego,

If this is CCM try this Message Lamp Setting in CCM for the xxxx (GDM line) Line appearances;

For the Line Setting on xxxx (each phone)-

Line Settings for this Device - Changes affect only this device

Message Waiting Lamp Policy - Light and Prompt

The RED Message Lamp will then work for this GDM line on each phone. Otherwise you will just get the "Flashing Envelope" Icon for new messages.

When the message is checked from any of the shared line phones the MWI Lamp will be extinguished on all others.

Hope this helps!

Rob

Hall of Fame Super Gold
New Member

Re: MWI doesn't light for GDM

Seems to complex to implement just for the light. The user will have to settle for the mailbox.

Thanks for your help and info.

Diego

164
Views
3
Helpful
3
Replies