Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MWI Issue for Line 2 in Unity connection.

Hi,

I am having an IP phone with 2 lines configured in it. If i get a voice mail in line 1 the MWI light will blink where as if i get a voice mail in Line 2 , MWI light doesn't blink. So is there any solution to make the MWI work for Line 2 also.

Call Manager version :8.X

Unity Connection Version : 7.X                  

Regards

Sankar.

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

MWI Issue for Line 2 in Unity connection.

Hi Sankar,

This change will be done in Communications manager, look at this setting on the individual

second lines or for the whole cluster

Device>Phone>Directory Number

(change from use system policy)

or

Clusterwide Parameters (Feature - General)

Message Waiting lamp Policy

the default is > Primary Line Light and Prompt

change to Light and Prompt > this will then activate the MWI for secondary lines

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

1 REPLY
Hall of Fame Super Red

MWI Issue for Line 2 in Unity connection.

Hi Sankar,

This change will be done in Communications manager, look at this setting on the individual

second lines or for the whole cluster

Device>Phone>Directory Number

(change from use system policy)

or

Clusterwide Parameters (Feature - General)

Message Waiting lamp Policy

the default is > Primary Line Light and Prompt

change to Light and Prompt > this will then activate the MWI for secondary lines

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

1662
Views
0
Helpful
1
Replies