Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Mwi not working in uc 8.5 version over sip integration with cucm

Hi all,

After sucessfully intergration of uc with cucm using sip. After making a test call from phone a to phone b . Phone a send the voice msg to phone b, but phone b has no mwi indicator & no msg notification icon also , but when I press msg button on phone b I can hear that there is new msg available. If any one has encourted this problem plz help

7 REPLIES
Hall of Fame Super Silver

Mwi not working in uc 8.5 version over sip integration with cucm

Does the CSS assigned to the SIP trunk list Parition of the phones?

Do you have any ports on UCON used by this integration configured for MWI?

Chris

New Member

Mwi not working in uc 8.5 version over sip integration with cucm

I have the exact same problem,

I double checked the CSS under Sip Trunk and all ports are configured for MWI

Thanks in advance

Hall of Fame Super Silver

Mwi not working in uc 8.5 version over sip integration with cucm

Are all the CUCM servers referenced under the port group in Unity Connection?

How many CUCM servers do you have in the environment?

Have you tried resynchying MWI?  How about restarting notifier service?

Chris

New Member

Mwi not working in uc 8.5 version over sip integration with cucm

Hi Chris,

Thank you for your answer.

I have a 3 server CUCM Cluster and all of them are referenced under port group.

I already resynched the MWI , restarted the notifier service on the UCON Publisher ( I cannot restart it on the subscriber. I guess it's normal) . I also restarted the entire UCON cluster but no success.

VIP Super Bronze

Mwi not working in uc 8.5 version over sip integration with cucm

Can you check that on your sip trunk security profile used for unity connection integration, you have

System>Security  > SIP Trunk Security Profile

The ff: checked

1. Accept out-of-dialog refer

2. Accept unsolicited notification

3. Accep replaces header

You can look in here for detailed explanation fo how to setup the SIP trunk integration..

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucm_sip/guide/cucintcucmsippdf.pdf

Please rate useful posts

"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Mwi not working in uc 8.5 version over sip integration with cucm

Thank you aoklawon, adding parameters to the security profile work for me.

Regards,

Romain

VIP Super Bronze

Mwi not working in uc 8.5 version over sip integration with cucm

Glad to know it helped you..Please dont forget to rate posts!

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
4113
Views
20
Helpful
7
Replies