Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MWI on a single phone for multiple mailboxes

Is there anyway to monitor from a single (supervisor's) phone if there were messages left for other extensions?

Using CME 3.4 and 7960G phones.

Thanks!

1 REPLY
Cisco Employee

Re: MWI on a single phone for multiple mailboxes

You could have the supervisor's phone share all the DN's for which he/she wants to see if there are any messages.

Do note that the MWI light can be lit for only one button on the phone. So, by default, if there is a message for the first button then the MWI light will go on and there icon next to the button will show an envelope. For other buttons, the MWI light will not be on. But, the icon next to that button will show an envelope.

If you want to light the MWI light for a particular button then you would use the mwi-line CLI...

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevmail.html#wp1023122

204
Views
0
Helpful
1
Replies
CreatePlease to create content