Need assistance setting up route pattern between CUCM and CME
Got CUCM 8.6 running with 3x 9951 and 2 x 7962G phones. They are set up with extensions 100X. I am also using CME 7.1 to terminate my voip.ms SIP trunk, CME has a single 7940 phone (ext 2000). I already setup dial-peers in CME and h323 gateway in CUCM. I can receive and place outside calls from the 7940 (CME) phone. Also, CME can call any of the CUCM phones but not the other way around.
This is for my home lab, my goal is to have my voip.ms # ring to all the phones in CME and CUCM. And be able to place outgoing calls using my voip.ms SIP trunk.
I know I need to create route pattern and route list but I could not find any documention (my Google-fu is failing me) on how to accomplish this and what the proper steps are.
If you could give me an idea or advise on how to configure this properly I would appreciate it. Thanks.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.