Need Configuration example Dial Peer/SIP trunking between CUCM & UCME.

[Sandeepkumar Patel]

Hi,

I have 2821 CME at remote location and Cisco UCM at Main location.   I need dial peer/SIP trunking over MPLS WAN connection configuration example for this..

DO any have it?  Please suggest any related soultion or exmaple link.

Thanks

Sandip

[Aaron Harrison]

Hi

Just use H.323.

1) Add a H.323 gateway to CCM, with the CME IP

2) Point a route pattern at the H.323 gateawy

3) Add a dial-peer on the CME pointing at the CCM IP

4) Add resilient duplicate dial-peers with lower preference pointed at your lower-order call processing CCMs

Regards

Aaron

Please rate helpful posts...

[Adrian Saavedra]

Hi Sandip,

Follow the steps that Aaron said. If you want to check those steps in detail with examples, you can use this documents as a guide:

H.323 Gateway Configuration Between CallManager Express and CallManager

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a00808ebbfe.shtml

H.323 Gateway Dial-Peer Configuration for Cisco CallManager Server Redundancy

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080094852.shtml

Hope to help, if it does please rate.

Regards,

- Adrián.