Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Need Configuration example Dial Peer/SIP trunking between CUCM & UCME.

Hi,

I have 2821 CME at remote location and Cisco UCM at Main location.   I need dial peer/SIP trunking over MPLS WAN connection configuration example for this..

DO any have it?  Please suggest any related soultion or exmaple link.

Thanks

Sandip

2 REPLIES
Super Bronze

Re: Need Configuration example Dial Peer/SIP trunking between CU

Hi

Just use H.323.

1) Add a H.323 gateway to CCM, with the CME IP

2) Point a route pattern at the H.323 gateawy

3) Add a dial-peer on the CME pointing at the CCM IP

4) Add resilient duplicate dial-peers with lower preference pointed at your lower-order call processing CCMs

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Re: Need Configuration example Dial Peer/SIP trunking between CU

Hi Sandip,

Follow the steps that Aaron said. If you want to check those steps in detail with examples, you can use this documents as a guide:

H.323 Gateway Configuration Between CallManager Express and CallManager

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a00808ebbfe.shtml

H.323 Gateway Dial-Peer Configuration for Cisco CallManager Server Redundancy

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080094852.shtml

Hope to help, if it does please rate.

Regards,

- Adrián.

887
Views
0
Helpful
2
Replies