All 3 files are found and fetched and after that it tries to load P00308010200.loads
So the TFTP Server Log shows the following:
Connection received from 172.30.2.81 on port 50209 [20/04 17:26:39.973] Read request for file <P00308010200.loads>. Mode octet [20/04 17:26:39.973] Using local port 3055 [20/04 17:26:39.973] <P00308010200.loads>: sent 1 blk, 461 bytes in 0 s. 0 blk resent [20/04 17:26:39.989]
But after that it doesn't go any further! It just repeats the same process over and over!
That is, the Phone simply resets and then it loads all 4 files again.
So it gets the CNF files again and then it tries again to to load P00308010200.loads and so on!
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.