Need IOS version recommendation for CCM 4.13 and Voicegateway??
We are running CCM 4.13SR2. Voice gateway is 2651XM with a 24 Channel PRI running 12.4(3f) which was deferred. I have been to all the Matrix docs that make suggestions but they are way behind the IOS versions which are available for download. Any ideas?? The Software Advisor wasn' that clear either.
Re: Need IOS version recommendation for CCM 4.13 and Voicegatewa
The determining factor(s) on what gateway IOS to run depends on 2 things. The first is stability and the second is features.
Looking at your gateway, the IOS you want to run will be primarily dependent on what type of VWIC you have supporting the 24 port T1.
In either case you want to be on the latest build of of 12.3.11T or 12.4.3. If you have the older VWIC-1MFT-T1 cards I would go with the 12.3.11T train of IOS. If you have the newer VWIC2-1MFT-T1/E1 go with the lastest build of 12.4.3
The lastest IP Voice release of each is 12.3.11T11 & 12.4.3g. Also the easiest way to find the latest release of IOS is the IOS upgrade planner
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...