Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need sample config/walkthrough for connecting two phones using CME or CUCM

Hello,

I have some spare routers (2651 w/CME image and 28xx) and some old phones (7940 and 7942). Can anyone provide a sample config or walkthrough/link to configure two phones on the same subnet  to talk to each other. The config/walkthrough can be with CME or CUCM 8.6. I really want to do this with both CME and CUCM. CME would be nice because it can run on the router.

Once again, this is just in a lab (for now) and with both phones on the same subnet.

Thank you,

  • IP Telephony
3 REPLIES
Hall of Fame Super Silver

Need sample config/walkthrough for connecting two phones using C

Everything you need to know about CME is here:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html

along with great config snippets and examples.

CUCM is a server based application and requires you to own the software/license, config is GUI driven.

Chris

Need sample config/walkthrough for connecting two phones using C

New Member

Need sample config/walkthrough for connecting two phones using C

Just run "telephony-service setup" and walk through the prompts.

192
Views
0
Helpful
3
Replies
This widget could not be displayed.