Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need to add Cisco Unified IP Phone 9951.

Hi

I have a Cluster of Cisco Unified Communicatio Manager Version 7.0.2.20000-5  (Publisher and Subscriber) .

I have  Cisco Unified IP Phone 9951 and i want to add this.

Kindly Advise me how i can add this new cisco unified IP Phone 9951 in CUCM.

Best Regards

Jamil Hussain

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: Need to add Cisco Unified IP Phone 9951.

VIP Super Bronze

Re: Need to add Cisco Unified IP Phone 9951.

Jamil,

Your version of CCM ie CCM7.0 does not have a device pack for the 9900 series phones. You need the CCM 7.1upgrade DVD for this. After the upgrade you can then go to cco to dwonload the required patch. Please contact a skilled personel or a cisco partner if you do not have the skills to do this.

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
13 REPLIES
Hall of Fame Super Red

Re: Need to add Cisco Unified IP Phone 9951.

Hi Jamil,

You will need 7.1(3a)su1 at a minimum

Cisco Unified IP Phone 8900 and 9900 Series

Before using the Cisco Unified IP Phone with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.

Note You can install Cisco Unified Communications Manager 7.1(3) or 7.1(3a). After you install one of these releases, you must install Cisco Unified Communications Manager*** 7.1(3a)su1. ***

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_1_3/cucm-rel_notes-713a.html#wp1754557

Cheers!

Rob

Red

Re: Need to add Cisco Unified IP Phone 9951.

If 9951 is not available as a phone model on CUCM 7.0.2, you need to upgrade CUCM.

Michael

http://htluo.blogspot.com

New Member

Re: Need to add Cisco Unified IP Phone 9951.

Yes 9951 is not available as a phone model on CUCM 7.0.2.

I need to upgrade CUCM or Device Package.

And if i need to upgrade first i need to install  7.1(3)  and then 7.1(3a)su1.

Please reply

Best Regards

Jamil Hussain

Hall of Fame Super Red

Re: Need to add Cisco Unified IP Phone 9951.

Hi Jamil,

This is shown as a direct upgrade path from 7.0(2) to 7.1(3a)su1

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp194692

Cheers!

Rob

New Member

Re: Need to add Cisco Unified IP Phone 9951.

Hi Rob

I need to Purchase 7.1(3a)su1 or I can download it from software section from cisco.com.

And also one more thing i have a running environment well during upgrade it will affect my previous confugration ?

New Member

Re: Need to add Cisco Unified IP Phone 9951.

We have CM 8.0. when We tryed to add 9951 phone it also doesnt appear in phone list.  what we need to put this phone in device list ?

Regards

Juan Carlos

New Member

Re: Need to add Cisco Unified IP Phone 9951.

Hi Ceron.

Could you please tell me the procedure for adding 9951 Phone in the device list.

How to add the phone in device List.

New Member

Re: Need to add Cisco Unified IP Phone 9951.

New Member

Re: Need to add Cisco Unified IP Phone 9951.

Does it supports same for Cisco unified Communication Manager Version 7.0.2.20000-5.

Regards

Jamil Hussain

VIP Super Bronze

Re: Need to add Cisco Unified IP Phone 9951.

Jamil,

Your version of CCM ie CCM7.0 does not have a device pack for the 9900 series phones. You need the CCM 7.1upgrade DVD for this. After the upgrade you can then go to cco to dwonload the required patch. Please contact a skilled personel or a cisco partner if you do not have the skills to do this.

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Re: Need to add Cisco Unified IP Phone 9951.

Dear aokanlawon

Thanks for your reply.

I was just confirming about the device package if its supporting  in CM Version 7.0.

Otherwise i can handle this task.

Regards

Jamil Hussain

New Member

Re: Need to add Cisco Unified IP Phone 9951.

Hi Good day to all

I have successfully upgraded CUCM 7.1(3)su1.

I have switched the version to new but received this error message after upgrading.Before i have uploaded the licence file for system and it was 2 one for PUBLISHER AND ONE FOR SUBSCRIBER.

Phone License Feature is ok but CCM Node License  Status is Showing Missing

Licensing Warnings:
System is operating on insufficient licenses. Please upload additional license files.

I have attached the snapshot for licence report.

Please advise.

New Member

Re: Need to add Cisco Unified IP Phone 9951.

Hi all

I have successfully upgrade CUCM to 7.1(3a)Su1 From 7.0.

Now i am able to see the option for Cisco Unified IP Phone 9951 but when i added the phones i got error message on Phone " Unable To Connect".

I check the device default Configuration and found in the Load information of 9951 AND 9971 IS EMPTY.

I am not able to register my phone because of LOAD INFORAMTIN is empty.

Kindy assist me to sort out this issue.

Waiting for a favourable reply.

Regards,,,

1667
Views
0
Helpful
13
Replies