Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.1(3)

Hi

I am not able to Configure Cisco Wireless IP Phone 7921 in  Call Manager Server 4.1(3)because Call Manager does not support 7921 Models, so  do we need to install Cisco 7921  firmware in Call Manger Server   or we need to upgrade the call manager.

I don't have any service contract to upgrade the call manager the only option is Firmware if it can support Cisco Wireless IP Phone 7921. 

Please advise me how i can accomplish it.

Waiting for a reply

.

3 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Yes, you'll just need an updated device package as linked above.

Brandon

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Jamil,

A reboot will be required. See the link below which says:

When applying this Device Package to enable new device support, a cluster-wide reboot is required for those devices to register successfully

http://www.cisco.com/web/software/282074299/26744/ciscocm.4-1-DevPack-89_readme.html

Hope this helps.

Brandon

10 REPLIES
New Member

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Hi Brandon

I have Call Manger Version  4.1(3)sr1.

Does it Support Cisco Wlreless IP Phone 7921 ?

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Yes, you'll just need an updated device package as linked above.

Brandon

New Member

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

I have a Cisco Call Manger (Publisher and Subscriber) Cluster with more than 500 Phones registerd and running.

I can do it normall or it will give me some down or any impact on the registerd Phones.

Regards

Jamil Hussain.

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Jamil,

A reboot will be required. See the link below which says:

When applying this Device Package to enable new device support, a cluster-wide reboot is required for those devices to register successfully

http://www.cisco.com/web/software/282074299/26744/ciscocm.4-1-DevPack-89_readme.html

Hope this helps.

Brandon

Cisco Employee

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Since you're adding support for a new phone you'll need to do a cluster reboot before the phone shows as an option.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Hi 

I want to ask one thing i have to install this device package on Publisher server only or on both

First on publisher and then on Subscriber.

Please tell me how i can do this.Please provide me a little hint.

Waiting for a reply.

Thanks and best Regards

Jamil hussain

Hall of Fame Super Red

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Hi Jamil,

Just to add a note to the great tips from Brandon & Java (+5 each!)

Procedure

NOTE: Apply this patch to all of your Cisco CallManager servers, beginning with the publisher server and TFTP server.

When applying this Device Package to enable new device support, a cluster-wide reboot is required for those devices to register successfully.   A clusterwide reboot IS NOT required when running to update existing firmware/support.

If installing on a Cisco Unified CallManager version earlier than 4.1(3)sr2, the following message will be displayed: “Install on all nodes is required.  All nodes will be rebooted as part of the installation.”

If installing on Cisco Unified CallManager 4.1(3)sr2 (recommended), the following message will be displayed: "Install on Publisher and TFTP server is required.  Installation on all nodes is highly recommended."   A clusterwide install/reboot is required.

This is directly from the ReadMe nicely linked by Brandon (above

Cheers!

Rob

New Member

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Hi Everybody

Thanks Brandon and also Rob and javalenc

I have got the full idea and now i am going to implement it.

i will update you whatever result i accomplish.

Thanks again

Best Regards

Jamil Hussain

New Member

Re: Need to add Cisco Wireless IP Phone in Cisco Call Manager 4.

Hi

Thanks for all

I have completed the update of device package and its successfully installed

God Bless you.

430
Views
10
Helpful
10
Replies