Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need to change Caller ID standard on FXO port

I need to change caller-ID standard from Bellcore to ETSI-DTMF on FXO port.

Caller ID Info Follows:

Standard BELLCORE

Caller ID is received after 1 ring(s)

How can i do that?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Need to change Caller ID standard on FXO port

You should be able to do this by changing the cptone.

Have a look here

http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_c6_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1100421

BR SE DK IS NL are known to use ETSI-DTMF.

Jesse

3 REPLIES
New Member

Re: Need to change Caller ID standard on FXO port

Does anybody know the answer? or a link to some documentation?

Any answers will be highly appreciated!

Cisco Employee

Re: Need to change Caller ID standard on FXO port

You should be able to do this by changing the cptone.

Have a look here

http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_c6_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1100421

BR SE DK IS NL are known to use ETSI-DTMF.

Jesse

New Member

Re: Need to change Caller ID standard on FXO port

thanks a lot! it helps.

359
Views
0
Helpful
3
Replies