Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need to configure VG 224 in Cisco Call Manager Express 4.0

I could not be able to find any matching configuration related to VG 224 to be configure in CME4.0.

6 REPLIES

Re: Need to configure VG 224 in Cisco Call Manager Express 4.0

Hello,

Basically, you would just configure the vg224 as an h323 gateway, and have voip dial-peers on the CME pointing to the extensions on the VG224, pots dial-peers on the VG224 pointing to the specific port that the extension is on, and voip dial-peers on the VG224 pointing to the CME to facilitate outbound calling. Example

On the CME:

dial-peer voice 5000 voip

description VG224 Analog Phones

destination-pattern 500[0-9]

session target ipv4:[ip of vg224]

dtmf-relay h245-alphanumeric

On the VG224

dial-peer voice 5000 pots

destination-pattern 5000

port 2/0

dial-peer voice 5001 pots

destination-pattern 5001

port 2/1

dial-peer voice 5002 pots

destination-pattern 5002

port 2/2

etc, etc.

For outbound dialing from the analog phones:

dial-peer voice 9 voip

description Outbound Calling

destination-pattern [insert outbound calling pattern]

session target ipv4:[ip address of CME router]

dtmf-relay h245-alphanumeric

Hope that helped, if so please rate.

New Member

Re: Need to configure VG 224 in Cisco Call Manager Express 4.0

Thanks for you suggesstion but now i cannot get Caller ID when dialing from my analog Phone , I am using E1 Link Need you valuable comment on this

Regards

TAB

Hall of Fame Super Gold

Re: Need to configure VG 224 in Cisco Call Manager Express 4.0

I do not recommend configuring the VG224 as H.323 GW. What you most likely want to so, is to configure it in SCCP mode. That will let you configure the analog phones just like ephones, with the full set of features.

New Member

Re: Need to configure VG 224 in Cisco Call Manager Express 4.0

Dear

What if i need to put a FAX instead of phone and can you pls help me to configure in SCCP mode

New Member

Re: Need to configure VG 224 in Cisco Call Manager Express 4.0

Dear

Can you please guide me with the SCCP configuration

Thanks in Advance

Regards

Re: Need to configure VG 224 in Cisco Call Manager Express 4.0

1026
Views
0
Helpful
6
Replies
CreatePlease login to create content