Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Network module interface

Hi i have a question related to the component: NM-2W so can we use VIC2-4FXO with that network module within cisco 3845?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Network module interface

No.

VIC2-4FXO, if no WIC slots are available in the 3845 chassis, must be used with an NM-x1V.

Hope this helps, please rate post if it does!

2 REPLIES
Hall of Fame Super Gold

Re: Network module interface

No.

VIC2-4FXO, if no WIC slots are available in the 3845 chassis, must be used with an NM-x1V.

Hope this helps, please rate post if it does!

Silver

Re: Network module interface

Hi Seifeddine

This URL will make everything clear with regards to NM-2W and supported sub modules. It would appear that the VIC2-4FXO is incompatible with NM-2W.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/hw_inst/nm_inst/nm-doc/ovrnetm.htm#wp1059726

Hope that helps.

Ajaz

101
Views
5
Helpful
2
Replies
CreatePlease to create content