new 200 lines

[CSCO11328190]

  Dears ,

          I received from service provider  ONE Access 1424  device for new 200 lines  , i want to connect

       this device to working network . I have 2801 gateway and CUCM 6.1 server connected to Multilayer switch

      4500 series .

          Please  i need the steps or links to connect this device .

Best Regards ,

[paolo bevilacqua]

Since that is not a Cisco product, why are you asking here ?

[CSCO11328190]

  Dear ,

   The configuration for this device it is from service provider . But how can i connect this device to

the voice gateway 2801 and CUCM 6.1 , and what the configuration can i configure in voice gateway

and CUCM 6.1. Service provider  give the device with SIP trunk configuration .

BestRegards ,

[Dennis Mink]

Hassan,

unsure what that 1424 device is, but you will have to work with your provider to build either:

a-a SIP Trunk from CUCM to the 1424

b:a SIP dial peer from your Cisco 2800 to the 1424 (and subsequently a pattern from your CUCM to your 2800)

I assume your provider gave you details on how to configure it in terms of authentication and IP address?!

R.,

[CSCO11328190]

  Dears,

     Please can you tell me the steps for basic SIP thrunk configuration on to

the 2801 router  and CUCM 6.1 .

   or any links for this .  Thanks

BestRegards ,