I'm no complete stranger to VoIP (I've done maintenance and port configs before), but I've been tasked with working on getting groundwork laid to a new implementation on our LAN, and I've never worked a VoIP project from inception to the end. Where do I begin? Some documentation and/or real world advice would be a big help. What are some of the things that I should be gathering information for first? I know that with large implementations often times its the little things that get overlooked, and they tend to be the biggest issues in the end. I need to know what those are as well as some of the standard "Things to Do" tasks. Thanks in advance for all your input.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...