04-30-2007 06:41 AM - edited 03-14-2019 09:13 PM
I am having trouble with a PRI making outbound local 7-digit calls. I have a PRI connected to ccm with MGCP protocol. I can dial 10 digit (area code plus number) fine, but am getting rejected when using 7.
According to Telco, I should have the ability to dial either / or. Any ideas?
04-30-2007 06:46 AM
Do you have a route pattern in place for 10 digit such as 9.[2-9]XX[2-9]XXXXXX and are you stripping the 9 before sending the call?
Brandon
04-30-2007 07:26 AM
Brandon,
I was using the 9.@ pattern. I created a 9.[2-9]xxxxxx pattern for 7 digit local and it works.
Thanks
04-30-2007 03:23 PM
For 7 digit dialing to work with 9.@ patterns you need to add a route filter which has the clause "local area code does not exist". This will prevent 10 digit dialing so you will need to add another 9.@ pattern or a similar route pattern with wildcards.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: