cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
721
Views
0
Helpful
2
Replies

NIC Teaming on HP DL380 Servers with CM 4.1(3)

swharvey
Level 3
Level 3

Can the nic teaming feature be enabled on the HP DL380 series servers? If so is there a minimum SP release needed on the OS/CM versions?

1 Accepted Solution

Accepted Solutions

gogasca
Level 10
Level 10

Yes, it can be enabled.

-Cisco-approved, customer-provided HP DL380 G2 server

-Cisco-approved, customer-provided HP DL380 G3 server, including single and dual processors

-Cisco-approved, customer-provided HP DL320 G2 server

-Cisco-approved, customer-provided HP DL320 G3 server

-Cisco-approved, customer-provided HP DL320 G4 server

-Cisco-approved, customer-provided HP DL380 G4 server, including single and dual processors

If you are running CCM 4.1(3) you need at least 2000.2.7sr2.

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_installation_guide09186a00803a0032.html#wp48523

In CCO do a search for HP DL380 NIC team and you will find useful links depending the current OS.

View solution in original post

2 Replies 2

gogasca
Level 10
Level 10

Yes, it can be enabled.

-Cisco-approved, customer-provided HP DL380 G2 server

-Cisco-approved, customer-provided HP DL380 G3 server, including single and dual processors

-Cisco-approved, customer-provided HP DL320 G2 server

-Cisco-approved, customer-provided HP DL320 G3 server

-Cisco-approved, customer-provided HP DL320 G4 server

-Cisco-approved, customer-provided HP DL380 G4 server, including single and dual processors

If you are running CCM 4.1(3) you need at least 2000.2.7sr2.

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_installation_guide09186a00803a0032.html#wp48523

In CCO do a search for HP DL380 NIC team and you will find useful links depending the current OS.

adbasinger
Level 1
Level 1

Th issue I have ran into is every time you open a TAC case they will say it is NOT supported and request you remove the team. The way that some aspects of the application are bound to the NIC address in the registry also are reasons why you cannot image the servers either. That and Micosoft SQL does not work well imaged....

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: