Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NM-4B-S/T for voice

Dear all,

Is it possible to configure NM-4B-S/T ISDN BRI Module on an ISR router for my connection to the PSTN for voice? Or do i need to use the VIC one?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: NM-4B-S/T for voice

Hi Jean,

Sadly the NM-4B-S/T does "not" support voice.

Voice Hardware Compatibility Matrix (Cisco 17/26/28/36/37/38xx, VG200, Catalyst 4500/4000, Catalyst 6xxx)

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68_ps5854_Products_Data_Sheet.html

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: NM-4B-S/T for voice

Hi Jean,

Sadly the NM-4B-S/T does "not" support voice.

Voice Hardware Compatibility Matrix (Cisco 17/26/28/36/37/38xx, VG200, Catalyst 4500/4000, Catalyst 6xxx)

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68_ps5854_Products_Data_Sheet.html

Hope this helps!

Rob

New Member

Re: NM-4B-S/T for voice

OK.

Thanks a lot.

268
Views
0
Helpful
2
Replies