Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NM-CUE upgrade from 2.1 to 7.0.2

Dear All,

I need to upgrade my NM-CUE from 2.1 to 7.0.2.

Please let me know how i can perform this task.

Thanks,

Regards,

Malik.

3 REPLIES
New Member

Re: NM-CUE upgrade from 2.1 to 7.0.2

Hi,as you had the same issue I am hoping you can help?

I am at the same stage of upgrade, can I jump from 3.2.1 to 7.0.5?

Upgrade option for CUE -
Available:
Latest Version 7:
7.0.5 - Release Date: 16/Dec/2009
7.0.4
7.0.3
7.0.2
7.0.1

Older generation 3:
3.2.4
3.2.3
3.2.2
3.2.1 - Release Date: 15/Sep/2009

Many Thanks,

Nico

Re: NM-CUE upgrade from 2.1 to 7.0.2

Hi,

In both scenarios you can go directly into 7.0.X directly, the best way would be to do a "Boot helper" install; it's recommended though that if you are upgrading from 2.X into 7.X you would do it in steps so first goint to a 3.X and then moving into 7.X. You can check the steps for the installation process on the link below:

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008064172a.shtml

On the link you'll find the steps for a clean install and boot helper install, the clean install might be a bit faster but I've found the boot helper method more reliable.

Cisco Employee

Re: NM-CUE upgrade from 2.1 to 7.0.2

You should be able to do a 'software install clean' for this.  No need to go from the boot helper if you can get to the CUE prompt on 2.1.

Note that you can only use the 'software install upgrade' feature if you are moving consecutive releases (i.e. 7.0.1 to 7.0.2), which you are not doing.

950
Views
0
Helpful
3
Replies