I want to configure clocking on a router with this configuration:
QUEEN#show inventory
NAME: "2651XM chassis", DESCR: "2651XM chassis"
PID: C2651XM-2FE , VID: 2.0, SN: JAE08083B32
NAME: "Enhanced High Density Voice Network Module", DESCR: "Enhanced High Density Voice Network Module"
PID: NM-HD-2VE= , VID: V , SN: FOC08440BH5
NAME: "One port E1 voice interface daughtercard", DESCR: "One port E1 voice interface daughtercard"
PID: VWIC-1MFT-E1= , VID: 1.0, SN: 34128133
NAME: "One port E1 voice interface daughtercard", DESCR: "One port E1 voice interface daughtercard"
PID: VWIC-1MFT-E1= , VID: 1.0, SN: 32513251
But I have this error:
QUEEN(config)#network-clock-participate slot 1
% ERROR: "network-clock-participate slot 1" is not
% appropriate under the current router hardware configuration.
Does any one know why this error occurs?
QUEEN#show ver
Cisco IOS Software, C2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(25b), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 12-Aug-09 10:59 by prod_rel_team
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
QUEEN uptime is 13 minutes
System returned to ROM by reload at 18:26:18 MSK Sun Feb 28 2010
System restarted at 18:25:42 MSK Sun Feb 28 2010
System image file is "flash:c2600-advipservicesk9-mz.124-25b.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2651XM (MPC860P) processor (revision 2.0) with 125986K/5086K bytes of memory.
Processor board ID JAE08083B32
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
32 Serial interfaces
2 Channelized E1/PRI ports
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Thank you.
