Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NM-HDA to provide DSP for CM hardware resource

Hello,

I've been asked to check if an NM-HDA can be used as a hardware resource for conferencing. Everything I can find on CCO points to NO, but I'd just like to make sure.

Can anyone say if they have done this or if it is supported?

They have a 2651XM running 12.3(4).T11

Thanks

Chris

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: NM-HDA to provide DSP for CM hardware resource

It's NOT supported

Prerequisites for Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1034467

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: NM-HDA to provide DSP for CM hardware resource

It's NOT supported

Prerequisites for Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1034467

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: NM-HDA to provide DSP for CM hardware resource

Hi,

Many thanks.

I'd told them it wouldn't but I really needed the confirmation, thanks.

Chris

106
Views
0
Helpful
2
Replies