Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

No Announcement Message Received when Placing VoIP Outbound Calls

hi,

we have CUCM 6.0 with cisco 2821 gateway (SIP protocol)"Version 12.4(15)T4" and

ROM: System Bootstrap, Version 12.4(13r)T, please help how to configure gateway router/ CUCM to get the Announcement Message Received from PSTN,

Regards,

Hammad

1 REPLY
Silver

Re: No Announcement Message Received when Placing VoIP Outbound

To convert a disconnect message with a progress indicator (PI) to a progress message, use the voice call convert-discpi-to-prog command in global configuration mode. To restore the default, use the no form of this command.

voice call convert-discpi-to-prog

no voice call convert-discpi-to-prog

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080111b58.shtml

147
Views
1
Helpful
1
Replies
CreatePlease to create content