We have a Cisco CUCM 9.1 at the main office which is connected to a Cisco 2911 router that serves as CUBE as well as a router for internet access and VPNs.
At one of the remote sites we have a Cisco ASA5505 and a Cisco 7945 IP phone. Between the sites we have a Site-to-Site IPSec VPN.
Other user has a standard router at home and connects to the office using Cisco VPN client from his laptop and runs Cisco IP Communicator.
- All remote users can call the office using local extensions fine and the sound works both ways just fine but if a remote user calls another remote user then there is no audio at all. We have to use external DDI to call from one site to another which works fine.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...