No audio for both ends when you enter an extension during greetings on Call Handler
I setup a call handler and during the greentings the caller should be able to enter anytime the extension. Everything looks fine, they can enter the extension during the greetings, the phone rings, the user picks it up, however there is no audio they cannot hear each other.
Using CUCM/CUC 8.2 with VG CUBE to the ITSP via SIP.
No audio for both ends when you enter an extension during greeti
Thanks for getting back...
Yes, it works internally.
I did not find this info using IPC, and I'm not able to access via web the phone in order to check the receiving RTP in the statistics. What's the right way to check this info? Is this command will help: sh voip rtp conn?
I'm going to double check for routing issue. I think I should issue: voice rtp send-recv command
I thought would be a codec negotiation too, but everything looks fine. The only thing I'm not sure if I would need the MTP checked. Now is not checked on the trunk in the CUCM.
Anyway, my guess would be routing issue and I'm going to apply this command, if it doesn't solve, then might be the codec issue. I'll let you know the results.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.