make an outbond call from sccp ip phone to pstn/gsm phone using SIP gateway (cisco 2800) no busy tone and Announcement Messages received, Continuously bell are ringing please help
Configure the Cisco IOS Software global configuration command, voice call convert-discpi-to-prog.
I have the same issue. Even with this commad, the call is still ringing and I don't receive the announcement from the operator in case of wrong number.
Did you solve this issue?
Try the command "voice call convert-discpi-to-prog" in global configuration as stated by an earlier reply. At first I was not putting the command right but now it is ok.
I tried this command but I cannot see any difference with or without it.
Which IOS version do you use? I tried with 12.4(9)T7 and 12.4(15)T8.
Can you send me your running-config?
It's strange, I am using 12.4(15)T8 which is only a Maintenance release, so it should work.
What is your CUCM version? I am using the new 6.1.3.
Thank you very much.
try adding this command:
voice rtp send-recv
if this helps, please rate
This command is already here. Please find attached my current configuration.
(removed some infos for privacy)