07-12-2010 04:50 PM - edited 03-15-2019 11:40 PM
Hello, my client has a Call Manager server MCS 7800. We have access to the GUI, but the former IT Manager's network docu
mentation has an incorrect password for telnet access. How can we go about recovering or resetting this password? I've also posted this in another discussion, so i apologize if anyone gets this post twice.
thanks for any help in advance.
Solved! Go to Solution.
07-12-2010 04:59 PM
Not sure which version you are running, but in the later versions the
following procedure should be used.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch2
.html#wp1040303
HTH.
Regards,
Bill
Please remember to rate helpful posts.
On 7/12/10 7:51 PM, "sdavis@diamondtechsolutions.net"
Please remember to rate helpful responses and identify
07-12-2010 04:59 PM
Not sure which version you are running, but in the later versions the
following procedure should be used.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch2
.html#wp1040303
HTH.
Regards,
Bill
Please remember to rate helpful posts.
On 7/12/10 7:51 PM, "sdavis@diamondtechsolutions.net"
Please remember to rate helpful responses and identify
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: