Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

No CLI access to Call Manager MCS 7800

Hello, my client has a Call Manager server MCS 7800.  We have access to the GUI, but the former IT Manager's network docu

mentation has an incorrect password for telnet access.  How can we go about recovering or resetting this password?  I've also posted this in another discussion, so i apologize if anyone gets this post twice.

thanks for any help in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: No CLI access to Call Manager MCS 7800

Not sure which version you are running, but in the later versions the

following procedure should be used.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch2

.html#wp1040303

HTH.

Regards,

Bill

Please remember to rate helpful posts.

On 7/12/10 7:51 PM, "sdavis@diamondtechsolutions.net"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

1 REPLY

Re: No CLI access to Call Manager MCS 7800

Not sure which version you are running, but in the later versions the

following procedure should be used.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch2

.html#wp1040303

HTH.

Regards,

Bill

Please remember to rate helpful posts.

On 7/12/10 7:51 PM, "sdavis@diamondtechsolutions.net"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

154
Views
0
Helpful
1
Replies
CreatePlease to create content