Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

No conference at remote site via WAN

hello,

i have call Manager 5.1 and the phones that resides at remote site via WAN.

i have used at local sie the G711 codec and via the WAN i have used G729.The problem is that the conference feature is not activated at the remote site.

Regards?

3 REPLIES
Cisco Employee

Re: No conference at remote site via WAN

if you're using the SW conference bridge it only supports G711.

If you need to enable conference for the remote users and to keep using G729 add a HW CFB or XCODER

HTH

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: No conference at remote site via WAN

hello,

thanks for reply, but how can i do this.

Please let me know.

Thanks at advance

Cisco Employee

Re: No conference at remote site via WAN

First of all you need DSP resources in a router to do this, if you have them the following links have the instructions on how to configure any of which i mentioned (HW CFB / XCODER)

Of course that after the configuration you need to arrange the MRGL to have the remote phones use them

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/partner/products/ps6441/products_configuration_guide_chapter09186a0080541bf3.html

CallManager and IOS Gateway DSP Farm Configuration Example

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml

HTH

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
171
Views
0
Helpful
3
Replies
CreatePlease to create content