Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

No correct time on Cisco 7961G with CCM.

Hello everybody

I have a problem with the telephones Cisco 7961G.

The time shows on the Cisco?s screen is 6 hours ahead from the time on the CallManager.

Version of the Cisco 7961g is SCCP41.80-4SR1S.

CallManager is 4.2(3)sr1.

Any help will be apreciated.

Regards

Walter Flores

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: No correct time on Cisco 7961G with CCM.

You might be running into DST related bugs

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh12444

Also check following TCC case

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K56131451

you can try upgrading the phone load to latest 8.2 or later and see if it helps

2 REPLIES
Bronze

Re: No correct time on Cisco 7961G with CCM.

You might be running into DST related bugs

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh12444

Also check following TCC case

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K56131451

you can try upgrading the phone load to latest 8.2 or later and see if it helps

New Member

Re: No correct time on Cisco 7961G with CCM.

HI NEESSHARM

After I upgraded the telephones Cisco 7961G y Cisco 7911G to the lastest version 8.2.

The show time on the phones are ok

THANK VERY MUCH FOR HELPING

Regards

Walter

136
Views
0
Helpful
2
Replies
CreatePlease to create content