No DRS Following CUCM upgrade 6.1.2 -> 6.1.3 -> 6.15..
We've just upgraded one of our cucm systems from 6.1.2 to 6.1.5 (via 6.1.3) and have tried to take a backup of the new system only to find we not getting any response from the DRS system.
We can log in to the DRS but clicking on Backup Device does nothing for a long time but then comes back with a message about no repsonse from the master or local agent. We've tried restarting both of the agents plus rebooting the whole system but get the same result?
We're only running on the demo license at the moment, we haven't uploaded our license file, would that explain it?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...