Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No dsps found either locally or globally

Ive started having this problem out of no where....

Cisco 2801 with pvdm-8 and a VIC2-FXO.

I had 5 dsp resources allocated to transcoding and everything was working fine. Calls to the PSTN worked and transcoding worked.

i started having trouble with making calls to the PSTN reciving this error:

Feb 14 06:16:18.666: %FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally or globally.

I noticed that the "in use" light on my FXO port was lit up, and stayed lit up after removing the cable. IOS reported the port was in use.

I rebooted the router and although the port is in dorm idle state, the problem still exists.

The only way I can fix it is by reducing the "maximum sessions" on the transcoding profile to 4 or less.

Does anyone know what may be wrong?

And can you shed some light as to why only a max 5 sessions are available with 2 x FXO when I have a PVDM-8?

-----

CCME-2#show voice dsp group all

DSP groups on slot 0:

dsp 1:

State: UP, firmware: 8.4.0

Max signal/voice channel: 8/8

Max credits: 240

Group: FLEX_GROUP_VOICE, complexity: FLEX

Shared credits: 10, reserved credits: 0

Signaling channels allocated: 2

Voice channels allocated: 0

Credits used: 0

Group: FLEX_GROUP_XCODE, complexity: MEDIUM

Shared credits: 0, reserved credits: 150

Transcoding channels allocated: 0

Credits used: 0

3 DSP resource allocation failure

----

CCME-2#show voice dsp signaling

edsp 001 01 g729r8 p 0.1 IDLE 50/0/1.1

edsp 002 02 g729r8 p 0.1 IDLE 50/0/1.2

edsp 003 01 g729r8 p 0.1 IDLE 50/0/2.1

edsp 004 01 g729r8 p 0.1 IDLE 50/0/3.1

edsp 005 01 g711ulaw 0.1 IDLE 50/0/4.1

edsp 006 02 g729r8 p 0.1 IDLE 50/0/4.2

edsp 007 01 g729r8 p 0.1 IDLE 50/0/12.1

edsp 008 01 g729r8 p 0.1 IDLE 50/0/20.1

----------------------------FLEX VOICE CARD 0 ------------------------------

*DSP SIGNALING CHANNELS*

DSP DSP DSPWARE CURR BOOT PAK TX/RX

TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT

===== === == ========= ======= ===== ======= === == ========= == ==== ============

C5510 001 01 {flex} 8.4.0 alloc idle 0 0 0/0/0 02 0 40/0

C5510 001 02 {flex} 8.4.0 alloc idle 0 0 0/0/1 06 0 37/0

------------------------END OF FLEX VOICE CARD 0 ----------------------------

------

voice-card 0

dsp services dspfarm

!

voice-port 0/0/0

cptone AU

connection plar opx 202

impedance complex1

caller-id enable

!

voice-port 0/0/1

cptone AU

connection plar opx 222

impedance complex1

caller-id enable

!

sccp local Vlan100

sccp ccm 10.0.10.1 identifier 1

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 1 register mtp0018babaa9a6

keepalive retries 5

!

dspfarm profile 1 transcode

codec g729ar8

codec g711alaw

codec g711ulaw

codec g729abr8

maximum sessions 5

associate application SCCP

!

!

telephony-service

sdspfarm units 1

sdspfarm transcode sessions 20

sdspfarm tag 1 mtp0018babaa9a6

!

!

5 REPLIES
New Member

Re: No dsps found either locally or globally

anyone?

Cisco Employee

Re: No dsps found either locally or globally

do you have the show voice dsp detail?

also, a show diag and show version?

Would like to see them

New Member

Re: No dsps found either locally or globally

CCME-2#show voice dsp detailed

edsp 001 01 g711ulaw 0.1 IDLE 50/0/1.1

edsp 002 02 g729r8 p 0.1 IDLE 50/0/1.2

edsp 003 01 g729r8 p 0.1 IDLE 50/0/2.1

edsp 004 01 g729r8 p 0.1 IDLE 50/0/3.1

edsp 005 01 g729r8 p 0.1 IDLE 50/0/4.1

edsp 006 02 g729r8 p 0.1 IDLE 50/0/4.2

edsp 007 01 g729r8 p 0.1 IDLE 50/0/12.1

edsp 008 01 g729r8 p 0.1 IDLE 50/0/20.1

----------------------------FLEX VOICE CARD 0 ------------------------------

*DSP VOICE CHANNELS*

CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending

LEGEND : (bad)bad (shut)shutdown (dpend)download pending

DSP DSP DSPWARE CURR BOOT PAK TX/RX

TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT

===== === == ========= ======= ===== ======= === == ========= == ==== ============

C5510 001 01 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 02 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 03 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 04 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 05 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 06 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 07 None 8.4.0 idle idle 0 0 0 0/0

C5510 001 08 None 8.4.0 idle idle 0 0 0 0/0

*DSP SIGNALING CHANNELS*

DSP DSP DSPWARE CURR BOOT PAK TX/RX

TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT

===== === == ========= ======= ===== ======= === == ========= == ==== ============

C5510 001 01 {flex} 8.4.0 alloc idle 0 0 0/0/0 02 0 37/0

C5510 001 02 {flex} 8.4.0 alloc idle 0 0 0/0/1 06 0 37/0

------------------------END OF FLEX VOICE CARD 0 ----------------------------

PVDM Slot 0:

8-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Hardware Revision : 4.0

Part Number : 73-8848-05

Board Revision : A0

Deviation Number : 0

Fab Version : 04

PCB Serial Number : FOC10353N2R

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM2-8

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 04 30 41 04 00 82 49 22 90 05 42 41 30

0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 33 35

0x20: 33 4E 32 52 03 00 81 00 00 00 00 04 00 09 00 CB

0x30: 87 50 56 44 4D 32 2D 38 89 56 30 31 20 D9 02 40

0x40: C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

New Member

Re: No dsps found either locally or globally

Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(9)T, RELEASE SOFTWARE (fc1)

ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)

CCME-2 uptime is 1 day, 22 hours, 57 minutes

System returned to ROM by power-on

System restarted at 14:04:38 GMT Mon Feb 19 2007

System image file is "flash:c2801-spservicesk9-mz.124-9.T.bin"

Cisco 2801 (revision 6.0) with 235520K/26624K bytes of memory.

Processor board ID FHK1037F13Z

6 FastEthernet interfaces

1 terminal line

2 Voice FXO interfaces

1 DSP, 8 Voice resources

1 cisco service engine(s)

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Cisco Employee

Re: No dsps found either locally or globally

Paul, per the DSP Calculator, it looks like there are not enough resources after all.

Per this tool the minimun needed is a PVDM2-16.

However, what is your IOS version so that I can check it out.

3213
Views
0
Helpful
5
Replies