cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
583
Views
5
Helpful
4
Replies

No MOH for external callers via Intercluster trunk (Callmanager 6)

esther.tan
Level 1
Level 1

External callers are not hearing MOH if the call goes through intercluster trunk (eg. Caller dial to UK which routes the call to another country/location via intercluster trunk).

Caller can hear the other party at far end, but when put on hold, no MOH is heard. No problem with internal calls (DN from one location calls another DN in another location via the trunk), only external calls are affected.

Unicast MOH is used.

Any advise is appreciated.

4 Replies 4

gogasca
Level 10
Level 10

Hi Esther

Check that ICT has an MOH server configured in a MRGL either in the device itself or DP

Check also that codec G711 as well as G729 are selected under IPVMS service parameters

We will check that. Meanwhile, pls see below on what we have tested:

1. One cisco phone calls through the intercluster trunk to another cisco phone/agent, MOH is working.

2. External call to one number in Cluster 1 which routes over to Cluster 2 via the trunk, Agent (UCCX) picks up but no MOH is heard when agent put callers on hold).

What he hears? Tone on hold or just silence

Check that GW n cluster 1 is able to reach

MOH server in cluster 2 (Ip connectivity)

Check codecs as well

Thanks for your help.

It works now, after configuring IPVMS parameter to include G729.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: