I am getting the following error in my event logs of our subscriber server running call manager4.2(3)sr1 and OS version 200.4.1. We are having problems calling internally to them and also 10 digit dialing them. Whenever we try to call them we get a busy signal. The problem is very intermittent, sometimes we are able to get through, other times we get a busy signal. Any ideas what this error message means?
Event Type: Error
Error: MtpNoMoreResourcesAvailable - No more MTP resources available.
App ID: Cisco CallManager
Cluster ID: StandAloneCluster
Explanation: MTP resource is not available.
Recommended Action: Install additional MTP or transcoder resources..
We had one of our Cisco techs out changing our codec to 729 externally and 711 internally. All of our other subscribers are working properly. I wasn't there when he set it up. Any ideas what I can do to check if thats the problem?
I checked the region configuration, all the locations appear to be consistent. I checked the SIP and the H323, but aren't those values clusterwide? so If its working on all the other subscribers why would there be a problem with only one of them?
Well we had to contact the cisco rep who did the codec changes for us. It seems that there were several issues all at once. First we were having problems with our PRI going up and down and secondly useres kept getting bandwidth errors because the router was misconfigured to 256k instead of unlimited. Once we got those resolved the calls started working again. Thanks so much for all of your help!
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...