No Ringback tone, when conversion from h.323 to SIP
I have some trouble.
I have call manager express 4.1 and AIM module witch CUE 3.2.2. I send and receive calls with H.323 protocol, g.729 codec. If i route incoming calls to an extension there is no problem - they can talk, and user from PSTN hear Ringback tone. But, when i route the incoming call to ATT (which is in cue module) and then call transfered from ATT to extension, user from PSTN do not hear a Ringback tone, until hadn-off extension. Then they can talk.
If ATT transfering call oh FXS extension (without SCCP protocol), the PSTN user can hear Ringback tone.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...