Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nokia E61 registration

Hi to all,

I have a CCME 4.2 and a Nokia E61 with installed Intellisysnc 1.1, a access point 1200.

I'm trying to configure the E61 to connect as IPphone, on wireless are correct associated (it browes intenet, e-mail etc) the SCCP client is correct configured (it seems... I also configure TFTP manually as CCME ip), but when I try to do a call with "internet telphony" it try to register on CCME but after some minute goes in timeout.

Here the configuration on the ephone on CCME:

telephony-service

load 7960-7940 P00308000500

load 7920 cmterm_7920.4.0-03-02

load 7941 SCCP41.8-2-2SR2S

load 7961 SCCP41.8-2-2SR2S

load 7971 SCCP70.8-2-2SR4S

load 7970 SCCP70.8-2-2SR4S

....

!

ephone-dn 17 dual-line

number 1017

description Nokia E61 Neri

name Nokia E61 Neri

no huntstop

!

...

!

ephone 21

device-security-mode none

mac-address 0013.FD43.61CB

type 7970

button 1:17

!

I'm sure of mac-address becasue I check it on AP and I read it on phone.

CCME can ping E61.

What can I check to verify why e61 does not registering? Any Ideas?

Thank

Augusto

2 REPLIES
New Member

Re: Nokia E61 registration

OK I already resolved, I restart the procedure of activation of intellisync ICC, that it seem was not correct licensed!

Now works fine.

Augusto.

Hall of Fame Super Gold

Re: Nokia E61 registration

All good...

Beware that using 8.0 the 7940 can go mute at random ... downgrade to 7.2.T023 if it happens.

117
Views
0
Helpful
2
Replies