Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Nokia Intellisync Call Connector transfer problem

Hello,

I've installed Nokia Intellisync Call Connector on a Nokia E51.

The Nokia E51 is registered (SCCP) on a Cisco UC500 system and works fine.

There is only one problem! When I've a call on the Nokia E51 en try a transfer (full-consult) to some other internal number the transfer fails. I get a transfer reject message on the Nokia E51.

I hope there is some solution for this problem. I've read the Nokia Intellisync User Guide and it seems to be possible.

Greets Niels

Please rate or mark answered for helpful posts.
  • IP Telephony
1 REPLY
Bronze

Re: Nokia Intellisync Call Connector transfer problem

Nokia ICC doesn't support consultative transfer with CME/UC500.

Automatic/Blind transfer is supported.

During call select options->Automatic transfer and dial the number

180
Views
0
Helpful
1
Replies
This widget could not be displayed.