Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Non lldp-med phone vlan support

All

hoping someone can help here. We have juniper ex switches and cisco call manager 6.1. Most of our phones (259 of them) are 7940/60. I really need help getting these to recognize voice vlan and get dhcp from our voice vlan when they don't support lldp-med.....thanks!

1 REPLY
VIP Super Bronze

Re: Non lldp-med phone vlan support

You will need to configure an 802.1q trunk port and allow the voice and data VLANs. The data VLAN should be the native VLAN.

The phone will need to be manually configured with the VLAN ID to tag it's traffic with. This is done through the Settings button; remember '**#' unlocks the running config.

Any other configuration would depend upon the switch port configuration you have.

370
Views
0
Helpful
1
Replies
CreatePlease to create content