Hi! I need your help regarding caller ID. When I called a DID->Nortel PBX->MGCP DSM-100 Gw->CUCM->Ip Phone, we see the caller ID. But when we called a DID who is answered by Octel, then transfert to an IP Phone trought the same MGCP DMS-100 Gw we see the Octel acces number on the IP phone. So what's the option that we need to modify to received the original caller on the IP Phone.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...