Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Not able to Convert 7961g SCCP to SIp

HI ,

I am configuring 7961g sccp to sip firmware. I have version cmterm-7941_7961-sip.8-0-2SR1. But it is looking for CTLSEP_Mac.tlv file. I have tried another hirger firmware too but same issue. Even use different type of TFTP server.

Still phone is in Unprovisioned Stage.

Thanks

Amardeep Rana

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Not able to Convert 7961g SCCP to SIp

This isn't an Asterisk forum. The manual XML file editing you're attempting isn't needed with Cisco call agents so the people on this forum won't be practiced in it. A quick Google search turned this up though:

http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP

Good luck.

Please remember to rate helpful responses and identify helpful or correct answers.

4 REPLIES
VIP Super Bronze

Not able to Convert 7961g SCCP to SIp

The CTL file is used for mixed-mode clusters and is not relevent to your firmware; the phone always asks for it.

If the phone says "Unprovisioned" on it, you're running SIP.

Please remember to rate helpful responses and identify helpful or correct answers.

New Member

Not able to Convert 7961g SCCP to SIp

Thank You Jonathan

Yes ,   phone says "Unprovisioned" on it and it is shwoing SIp firmwae also when I check it . But please let me know how to get it working.  I want it working with Trixbox server.

ThankYou

Amardeep Rana

VIP Super Bronze

Not able to Convert 7961g SCCP to SIp

This isn't an Asterisk forum. The manual XML file editing you're attempting isn't needed with Cisco call agents so the people on this forum won't be practiced in it. A quick Google search turned this up though:

http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP

Good luck.

Please remember to rate helpful responses and identify helpful or correct answers.

New Member

Not able to Convert 7961g SCCP to SIp

Thank You Jonathan,

You helped a lot.. I should mark it as Answer.

There was issue wth my Sepmac.cnf.xml . I make it proper and everthing is fine.

Thanks

Amardeep Rana

220
Views
0
Helpful
4
Replies
CreatePlease to create content