cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
291
Views
9
Helpful
3
Replies

not disconnecting

pcromwell
Level 3
Level 3

I ahve a cucm ver 7.0 we are testing pstn lines at the moment.

When I make an outgoing call, all is fine, if the called party then hangs up, my line is still staying active, then a announcemnt is made that "the other person has hung up" does nayone have any ideas?

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Where are you located? See:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

Note, avoid analog lines as much as possible. Using ISDN will give you all the advantages and notne of the trouble.

sorry, I should have said,

It is uk based with standard ISDN 30 connection.

I know it's been a few months since this call was raised but I just had a similar issue and resolved it with the 'voice call disc-pi-off' command.

Hope you found this before now.

Paul