Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Not working after 24 hours when enabling call forward All in IP phone 7945

Hi..

Can anyone help me here!

I ahve 7945 phone and when enabling call forward all from phone its working and after 24 hours its not functioning.

The current firmware version is SCCP45.9-0-2SR1S.

Thanks,

Anbarasan

7 REPLIES
New Member

Not working after 24 hours when enabling call forward All in IP

Hi,

Do you have other models the IP Phone with same problem?

CUCM don´t check time for this, if problem is in 7945 upgrade the Fw for latest version (9-3-1SR2-1).

Regards.

J Rosa

.

Cisco Employee

Not working after 24 hours when enabling call forward All in IP

So, the phone and CCMAdmin still show the CFA but the phone rings?

But only after 24 hours?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Not working after 24 hours when enabling call forward All in IP

Hi,

Yes, the CFA get removed automatically after 24 hours and the phone rings.

Thanks and warm regards,

Anbarasan P

New Member

Not working after 24 hours when enabling call forward All in IP

What is your CM ver ?

New Member

Not working after 24 hours when enabling call forward All in IP

The current version  is 8.0.2.40000-1

New Member

Not working after 24 hours when enabling call forward All in IP

I'm not aware of any specific defect with this version of CUCM which causes CFA to stop working. If the phones are registered to the subscriber, change the Device Pool on a couple of phones such that they register to the publisher. When registered to the publisher, if this issue doesn't occur, then this would normally point to a DB replication issue and therefore you would need to fix DBReplication first.

New Member

Not working after 24 hours when enabling call forward All in IP

Hi,

Are both the phones sharing same device pool?

204
Views
0
Helpful
7
Replies