i am facing an issue with ntp. first my publisher got unsynchronized with ntp. pub got sync but sub1 and sub2 and tftp all three servers did not got sync for around 10 hours.
cucm version 8.6. i got mails from rtmt for the same.
At Thu Oct 17 21:33:50 IST 2013 on node 10.105.11.17, the following SyslogSeverityMatchFound events generated:
SeverityMatch : Critical
MatchedEvent : Oct 17 21:33:42 PUN-HJW-CTFTP1 user 2 ntpRunningStatus.sh: Primary node NTP server, PUN-HJW-CPUB1, is currently inaccessible or down. Verify the network between the primary and secondary nodes. Check the status of NTP on both the primary and secondary nodes via CLI 'utils ntp status'. If the network is fine, try restarting NTP using CLI 'utils ntp restart'.
AppID : Cisco Syslog Agent
NodeID : PUN-HJW-CTFTP1
TimeStamp : Thu Oct 17 21:33:42 IST 2013
i received this mail around 1700 times. not thw time is synchronized on all the servers.
please let me know how to tshoot i mean how should i collect traces so that i can find the root cause.
i collected some logs from RTMT but i am unable to trace the cause. please find the logs in attachement.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...