cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
437
Views
5
Helpful
4
Replies

NTP on MPE

jones2sr
Level 1
Level 1

How do you configure/start NTP on Meeting Place Express? I keep having to reset the time. Today it was 20 minutes behind and caused all kind of havoc. :P

Thanks

1 Accepted Solution

Accepted Solutions

thisisshanky
Level 11
Level 11

Jones,

From MPX desktop or remote ssh into a shell session on MPX server. Type "net".

A menu with lot of options will show up and then you can choose option 8 to configure NTP service.

Once you change the settings, save it when the menu prompts and reboot the server.

HTH

Sankar

PS: please remember to rate posts!

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

View solution in original post

4 Replies 4

thisisshanky
Level 11
Level 11

Jones,

From MPX desktop or remote ssh into a shell session on MPX server. Type "net".

A menu with lot of options will show up and then you can choose option 8 to configure NTP service.

Once you change the settings, save it when the menu prompts and reboot the server.

HTH

Sankar

PS: please remember to rate posts!

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

I have done this and it still is not syncing. I can ping the NTP server from the MPX server

I have checked the /etc/ntp.conf and it shows the ntp server listed there as well.

Did you ever get the ntp to sync on mpe?

Yes - we had to log a TAC case to resolve this in the end. We also had to update the MPE version.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: