03-12-2008 09:12 AM - edited 03-15-2019 09:24 AM
Hi. I've jsut configured an NTP server address on my UC520 (ntp address: 158.43.128.33) (Im in the UK, thats a Pipex clock)
UC520#sh ntp st
Clock is synchronized, stratum 3, reference is 158.43.128.33
nominal freq is 250.0000 Hz, actual freq is 249.9999 Hz, precision is 2**18
reference time is CB827DB2.A381D62C (09:05:06.638 GMT Wed Mar 12 2008)
clock offset is 3.6711 msec, root delay is 58.90 msec
root dispersion is 19.26 msec, peer dispersion is 2.72 msec
UC520#sh clock
09:05:14.206 GMT Wed Mar 12 2008
UC520#
Looks good you may ad... but its actually 16:05 at the moment!!
How can I be getting the wrong time from an NTP clock?!
03-12-2008 10:19 AM
Hi Huw,
This may be related to the;
clock timezone command
Troubleshooting Incorrect Time Stamp on IP Phones in Cisco Unified CME
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/troubleshooting/guide/ts_time.html#wp1053981
This was really covered nicely by Paul in this thread :)
Hope this helps!
Rob
03-12-2008 10:43 AM
Hi Rob, thanks for the reply, it was a timezone issue yeah
I ended up removing the reference to the NTP server and using the following command:
clock summer-time BST recurring 4 SUN MAR 1:00 4 SUN OCT 2:00
now working OK on my 7941's and 7921's!
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide